FAQ (Frequently Asked Questions)

Roof Analysis and Planning:
Assess the condition of the existing roof, if it's a renovation. Check for damages, leaks, or structural weaknesses.
For new constructions, carefully plan the roof structure and shape. Consider factors such as roof pitch, snow or wind loads, and the integration of skylights or solar panels.
Material Selection:
Choose appropriate materials for roofing, such as tiles, slate, metal, bitumen, or shingles, considering climate, aesthetics, and budget.
Also, consider the necessary materials for roof insulation and sealing.
Tools and Safety Equipment:
Ensure all necessary tools and equipment are available, including ladders, safety harnesses, hammers, nails, screws, etc.
Observe all safety precautions and use the required personal protective equipment like helmets, safety harnesses, and non-slip shoes.
Substructure and Insulation:
Inspect the rafters or beams for their integrity. Replace or repair damaged parts.
Install proper roof insulation to minimize heat loss and increase energy efficiency.
Roofing:
Start laying the roofing material while adhering to manufacturer instructions and technical standards.
Ensure correct overlap and fastening of roofing materials to ensure waterproofing and longevity.
Installation of Roof Accessories:
Install additional elements like skylights, ventilation openings, or solar panels if needed.
Ensure these elements are properly sealed and integrated.
Joint and Sealing Work:
Ensure all joints and connections, especially around skylights and chimneys, are properly sealed to avoid leaks.
Final Inspection and Cleanliness:
Inspect the entire roof for completeness and quality of work.
Clean the roof and remove any excess materials, nails, or debris.
Regular Maintenance:
After completing the roofing work, regular inspection and maintenance are important to ensure the longevity of the roof.
 

Needs Analysis and System Selection:
A thorough analysis of the living space is crucial. Measure the total area of the house and consider factors such as ceiling height, window size and orientation, insulation level, and even geographical location. These factors influence the type and size of HVAC system needed. For example, homes in colder climates may require more powerful heating systems.
Energy Efficiency:
Look for HVAC systems with high energy efficiency. Devices with a high SEER (Seasonal Energy Efficiency Ratio) rating for air conditioners or a high AFUE (Annual Fuel Utilization Efficiency) rating for heaters are preferable. While these devices may cost more upfront, they save energy costs in the long run.
Equipment Quality and Manufacturer Choice:
Invest in equipment from reputable brands with good reviews and warranty coverage. High-quality devices typically offer better performance, durability, and lower failure rates.
Professional Installation and Compliance:
Installation by licensed professionals is essential. Correct installation is crucial for system efficiency and longevity. Ensure installers adhere to all relevant codes and regulations.
Ventilation and Air Quality:
A good HVAC system should also consider air quality. Options such as air purifiers, humidifiers, and energy recovery ventilators can be integrated to ensure constant and clean air circulation.
Regular Maintenance:
Schedule regular maintenance appointments from the start. This includes cleaning or replacing filters, checking refrigerant levels, and inspecting heating components. Regular maintenance prevents major breakdowns and keeps the system efficient.
Smart Home Integration:
Modern HVAC systems can often be integrated into smart home technologies. This allows for remote temperature control, programming heating/cooling schedules, and monitoring energy consumption, contributing to further efficiency.
Budget and Cost-Benefit Analysis:
Consider the total cost of the system including installation, operation, and maintenance. It's important to strike a balance between initial costs and long-term savings from energy efficiency.
Compliance with Regulations and Standards:
Familiarize yourself with local building codes and environmental standards. Your system should not only be efficient but also environmentally friendly, complying with local emission and noise limits.
Planning for the Future:
Consider potential future changes in your home. If you plan to expand or remodel your house, ensure your HVAC system is flexible enough to adapt to these changes.

Preliminary Planning and Design:
Create a detailed plan for the electrical installation, based on the needs and functionality of the space. This includes the arrangement of outlets, light switches, fixtures, and other electrical devices.
Consider future expansions or changes in the electrical setup.
Knowledge of Regulations and Standards:
Familiarize yourself with local electrical installation regulations and safety standards. These are crucial for the safe and code-compliant execution of the work.
Tools and Materials:
Ensure all necessary tools and materials are available, including cables, outlets, switches, distribution boxes, circuit breakers, etc.
Choose materials that comply with applicable standards.
Safety Precautions:
Always turn off the power supply before starting work.
Wear appropriate personal protective equipment, such as insulated gloves and safety glasses.
Laying of Wiring:
Carefully lay the electrical wires and plan the cable routes. Ensure the cables are not damaged.
Use cable channels or conduits for safe and tidy cable routing.
Installation of Switches, Outlets, and Devices:
Mount switches and outlets properly and ensure they are securely fixed.
Install electrical devices according to the manufacturer's instructions and technical specifications.
Connection and Testing of Electrical Installation:
Connect the cables to the corresponding switches, outlets, and electrical devices.
Check all connections for proper wiring and secure fastening.
Commissioning and Functional Testing:
Turn the power supply back on and conduct functional tests for all installed elements.
Verify that all switches, outlets, and devices are functioning as intended.
Documentation and Labeling:
Document the electrical installation work performed and label the electrical circuits for future reference or maintenance.
Maintenance and Inspection:
Schedule regular inspections and maintenance to ensure the safety and functionality of the electrical system.

Detailed Planning and Design:
Start with a clear idea or plan of what you want to build. This can include furniture, built-in cabinets, doors, windows, or decorative elements.
Draw detailed sketches or plans with precise measurements and specifications. Consider the proportions and style that fits your space.
Material Selection:
Choose the right wood or material for your project. Different types of wood have different properties and aesthetics – from hardwoods like oak or walnut to softwoods like pine.
Consider wood quality, grain, color, and durability for the intended use.
Tool Selection and Maintenance:
Use the right tools for each task, including saws, planes, chisels, and sanding tools.
Keep your tools sharp, clean, and well-maintained to ensure precise cuts and high-quality workmanship.
Accuracy and Measurements:
Measure everything carefully and regularly check your measurements to avoid errors.
Use appropriate measuring tools such as rulers, angles, and straightedges.
Cutting Techniques and Woodworking:
Master various cutting techniques for different requirements, such as straight cuts, miter cuts, or complex shapes.
Consider the direction of the wood grain when cutting to avoid splintering.
Assembly and Construction:
When assembling the parts, use appropriate joining techniques such as dowels, tenons, or screws.
Ensure that all parts are correctly aligned and fit together snugly.
Surface Treatment and Finishing:
Carefully sand the wood to achieve a smooth surface.
Choose appropriate surface treatments such as paint, oil, or wax, depending on the desired aesthetics and protection needs of the wood.
Safety and Ergonomics:
Always prioritize your safety. Wear protective equipment such as safety glasses, gloves, and ear protection.
Organize your workspace ergonomically to reduce fatigue and increase efficiency.
Environmental Awareness:
Consider how to minimize or reuse material waste.
Choose sustainable or certified wood sources whenever possible.
Quality Control and Fine-tuning:
Regularly inspect your work for accuracy and quality.
Take time for fine-tuning and corrections to ensure a high-quality end product.

Preparation Before the Disposal Order:

1. Type of Waste: Clarify the type of waste to be disposed of, ranging from household waste to hazardous or special waste.
2. Quantity Specification: Estimate the quantity of waste to be disposed of to determine the scope of the order.
3. Environmental Considerations: Inquire about environmentally friendly disposal methods to minimize impact on the environment.

Selection of the Disposal Provider:

4. License and Certifications: Verify if the disposal provider has the necessary licenses and certificates to legally dispose of waste.
5. Experience and Reputation: Inquire about the disposal provider's experience and read reviews or references from other customers.
6. Cost: Request cost estimates from different disposal providers and clarify what costs and fees are included in the quote.
7. Disposal Methods: Ask about the methods the provider uses for disposal and ensure they comply with local regulations and environmental standards.

Execution of the Disposal Order:

8. Preparation of Waste: Ensure that the waste is properly prepared and packaged, if required.
9. Transport and Pickup: Clarify how the waste will be picked up and transported, and schedule a convenient time.
10. Contract: Enter into a written contract clearly outlining agreements, costs, and timelines.
11. Disposal Proof: Demand proof of disposal or confirmation that the waste has been legally and environmentally disposed of.

After the Disposal Order:

12. Payment: Ensure payment to the disposal provider is made according to the agreements.
13. Feedback and Rating: Share your experience with the disposal provider and leave a review if applicable.

By considering these points, you can ensure that the disposal of your waste is in accordance with laws and environmental regulations.

1. Experience and Expertise: Ensure that the transportation company has experience and expertise in piano transport. Piano transportation requires special skills and equipment.
2. Insurance: Check if the company has the necessary liability insurance to cover any potential damage to the piano during transport.
3. Transportation Vehicle: Clarify which transportation vehicle will be used for piano transport. A piano requires special arrangements and safety measures for secure transportation.
4. Access to Locations: Ensure that the transportation company has access to both locations, the pickup and the destination. This includes addressing stairs, narrow doors, and other access restrictions.
5. Scheduling: Schedule a fixed date for piano transport and ensure that it is convenient for both you and the transportation company.
6. Piano Preparation: Prepare the piano by securing removable parts and protecting delicate surfaces to avoid damage during transport.
7. Communication: Clarify communication and information exchange with the transportation company in advance, especially in the case of delays or unforeseen issues.
8. Costs: Discuss costs in advance and clarify if there are additional fees for special requirements or services.
9. References: Check the references of the transportation company and read reviews or testimonials from other customers.
10. Post-Transportation Inspection: After completing the piano transport, inspect the piano for any damages and provide feedback to the transportation company.

Choosing the right company for piano transport is crucial to ensure that your piano reaches its destination safely and without damage.

1. Clear Agreements: Ensure that you establish clear agreements with the cleaning company. This includes the scope of cleaning, pricing, timing, and any additional services.
2. Experience and Reputation: Check the experience and reputation of the cleaning company. Find out how long they have been in the industry and read reviews and references if possible.
3. Insurance: Make sure the company has the necessary insurance to cover any potential damages or losses that may occur during the cleaning.
4. Cleaning Products Used: Clarify in advance which cleaning products and equipment will be used. If you have specific preferences or allergies, communicate this to the cleaning company.
5. Scheduling: Set a fixed date for the cleaning and ensure it is convenient for both you and the cleaning company.
6. Access to the Apartment: Ensure that the cleaning staff has access to the apartment and clarify whether you need to be present personally or can leave a key.
7. Control and Communication: Agree on how you will assess the quality of the cleaning and establish a communication plan with the company in case you are dissatisfied or have further concerns.
8. Pricing: Clarify costs and potential additional charges in advance. Pay attention to whether the price is fixed or if there are extra fees for special services.
9. Vacating the Apartment: Ensure that the apartment is largely vacated before cleaning, allowing the cleaning staff to work efficiently.
10. Feedback: Provide feedback to the cleaning company after the completion of the work to help them improve their services.

By considering these points, you can ensure that the apartment cleaning meets your expectations and needs.

1. Experience and References: Inquire about the painter's experience and request references from previous clients to assess the quality of their work.
2. Insurance: Ensure that the painter has liability insurance to cover any potential damages during the work.
3. Cost and Estimate: Request a detailed cost estimate that includes material costs, labor costs, and any additional fees.
4. Scope of Work and Schedule: Clarify the exact scope of work and the schedule for carrying out the painting.
5. Use of High-Quality Paints and Materials: Ensure that the painter uses high-quality paints and materials to achieve a durable and professional result.
6. Color Consultation: Ask for color consultation if you are unsure about which colors will best suit your spaces.
7. Protective Measures: Clarify how the painter will protect your furniture and floors during the work to prevent any damages.
8. Communication and Coordination: Maintain clear communication with the painter and clarify all details in advance, including any changes to the scope of work.
9. Contract: Enter into a written contract with the painter that clearly defines the agreements, costs, and timeframes.
10. Final Inspection: Ensure that the painter conducts a thorough inspection of the result upon completion of the work to confirm that all tasks were carried out according to the agreements.
11. Payment: Agree on payment terms in advance and only make payments once the work has been satisfactorily completed.
12. Warranty: Inquire about the warranty conditions offered by the painter for their work and clarify the procedures in case of any defects.

By paying attention to these points, you can ensure that the painting work is carried out professionally and to your satisfaction.

1. License and Certification: Ensure that the plumbing installer has the necessary license and certificates to carry out plumbing work.
2. Experience and References: Inquire about the plumbing installer's experience and request references from previous clients to assess the quality of their work.
3. Insurance: Ensure that the plumbing installer has liability insurance to cover any potential damages or injuries during the work.
4. Cost and Estimate: Request a detailed cost estimate that includes material costs, labor costs, and any additional fees.
5. Scope of Work and Schedule: Clarify the exact scope of work and the schedule for carrying out the plumbing work.
6. Warranty and Guarantee: Inquire about the warranty or guarantee conditions offered by the installer for their work.
7. Contract Signing: Sign a written contract with the installer that clearly defines the agreements, costs, and timeframes.
8. Use of High-Quality Materials: Ensure that high-quality materials are used for plumbing work to ensure longevity and functionality.
9. Permits and Building Codes: Check if permits are required for the planned work and clarify whether the installer is familiar with local building codes and plumbing standards.
10. Communication and Coordination: Maintain clear communication with the installer and address any questions or concerns in advance.
11. Final Inspection and Functionality Check: Ensure that the installer thoroughly inspects the installed plumbing fixtures before completion and checks for functionality.
12. Payment: Agree on payment terms in advance and only make payments once the work has been satisfactorily completed.
13. Aftercare: Inquire about the possibility of aftercare or maintenance for the plumbing fixtures if needed.

By paying attention to these points, you can ensure that the plumbing work is carried out professionally and to your satisfaction.

Kitchen:

• Clean the oven
• Clean the refrigerator
• Clean cabinets and drawers
• Clean the sink and faucet
• Clean countertops
• Clean the floor

Bathroom:

• Clean the toilet
• Clean the sink and faucet
• Clean the shower and bathtub
• Clean tiles and grout
• Clean mirrors
• Clean the floor

Living room and bedroom:

• Dust and clean furniture
• Vacuum or mop carpets and floors
• Clean windows and window frames
• Wipe light switches and outlets

General:

• Dust shelves, cabinets, picture frames, etc.
• Clean doors and door handles
• Remove cobwebs
• Dispose of waste
• Clean electronic appliances such as washing machine, dishwasher, etc.

1. License and Certification: 
Verify if the plumbing contractor holds the necessary license and certificates to carry out plumbing works.
2. Experience and References:
Inquire about the plumber's experience and request references from previous clients to assess the quality of their work.
3. Insurance: 
Ensure that the plumber has liability insurance to cover potential damages or injuries during the work.
4. Costs and Estimate:
Request a detailed cost estimate, including material costs, labor costs, and any additional fees.
5. Scope of Work and Schedule: 
Clarify the exact scope of work and the schedule for executing the plumbing tasks.
6. Warranty and Guarantee:
Inquire about the warranty or guarantee conditions that the plumber offers for their work.
7. Contract Agreement: 
Enter into a written contract with the plumber, clearly outlining agreements, costs, and timeframes.
8. Use of High-Quality Materials:
Ensure that high-quality materials are used in the plumbing work to guarantee durability and functionality.
9. Permits and Codes: 
Check if building permits are required for the planned works and confirm the plumber's familiarity with local building regulations and plumbing standards.
10. Communication and Coordination: 
Maintain clear communication with the plumber and address any questions or concerns in advance.
11. Final Inspection and Functionality Check: 
Ensure that the plumber thoroughly inspects and checks the installed plumbing fixtures for functionality before completion.
12. Payment: 
Agree on payment terms in advance and make payment only when the work is satisfactorily completed.
13. Post-Service Support: 
Inquire about the possibility of post-service support or maintenance for the plumbing fixtures if needed.
Considering these points will assist you in finding a qualified and trustworthy plumbing contractor, ensuring the successful completion of your plumbing works.

License and Certification:
Ensure that the roofer has the necessary licenses and certifications for roofing work.
Experience and References:
Inquire about the roofer's experience in this field and request references from previous customer projects.
Insurance:
Make sure the roofer has adequate liability insurance to cover any damages during the work.
Cost and Estimate:
Request a detailed cost estimate that includes material costs, labor costs, and any additional fees.
Scope of Work and Schedule:
Clarify the exact scope of the roofing work and the timeline for completion.
Guarantee and Warranty:
Inquire about the warranty or guarantee terms offered by the roofer for their work.
Contract Conclusion:
Enter into a written contract with the roofer, clearly outlining all agreements, costs, and timelines.
Material Selection and Quality:
Discuss the selection of roofing materials and the quality of the materials used.
Roof Inspection and Preparation Work:
Clarify if a preliminary roof inspection is required and if additional preparation work on the roof is necessary.
Permits and Standards:
Check if building permits are required for the planned work and clarify if the roofer is familiar with local building codes and standards.
Communication and Coordination:
Establish clear communication channels for questions and coordination.
Final Inspection and Quality Assurance:
Ensure that a thorough final inspection of the roofing work is conducted and that the quality meets expectations.
Payment Terms:
Agree on clear payment terms, including deposits and the timing of the final payment.
Safety Measures:
Inquire about the safety measures taken during the work to prevent accidents.
Roof Maintenance and Inspection:
Discuss the possibility of regular roof maintenance and inspection after the completion of the work.

License and Certification:
Check if the professional has the necessary licenses and certificates for flooring and tiling work.
Experience and References:
Inquire about the professional's experience in this field and request references from previous customer projects.
Insurance:
Ensure that the professional has adequate liability insurance to cover any damages during the work.
Cost and Estimate:
Request a detailed cost estimate that includes material costs, labor costs, and any additional fees.
Scope of Work and Schedule:
Clarify the exact scope of the flooring and tiling work and the timeline for completion.
Guarantee and Warranty:
Inquire about the warranty or guarantee terms offered by the professional for their work.
Contract Conclusion:
Enter into a written contract with the professional, clearly outlining all agreements, costs, and timelines.
Material Selection and Quality:
Discuss the selection of flooring and tiles, as well as the quality of the materials used.
Preparation Work and Subfloor:
Clarify if additional preparation work on the subfloor is required and who is responsible for it.
Permits and Standards:
Check if building permits are required for the planned work and clarify if the professional is familiar with local building codes and standards.
Communication and Coordination:
Establish clear communication channels for questions and coordination.
Final Inspection and Quality Assurance:
Ensure that a thorough final inspection of the flooring and tiling work is conducted and that the quality meets expectations.
Payment Terms:
Agree on clear payment terms, including deposits and the timing of the final payment.
Follow-up and Care Instructions:
Inquire about the possibility of follow-up or maintenance for the flooring and tiles, and obtain care instructions.
 

License and Certification:
Check if the electrician has the required licenses and certificates for electrical installations.
Experience and References:
Inquire about the electrician's experience in this field and request references from previous customer projects.
Insurance:
Ensure that the electrician has adequate liability insurance to cover any damages during the work.
Cost and Estimate:
Request a detailed cost estimate that includes material costs, labor costs, and any additional fees.
Scope of Work and Schedule:
Clarify the exact scope of the electrical installation work and the timeline for completion.
Guarantee and Warranty:
Inquire about the warranty or guarantee terms offered by the electrician for their work.
Contract Conclusion:
Enter into a written contract with the electrician, clearly outlining all agreements, costs, and timelines.
Material Selection and Quality:
Discuss the selection of electrical components and the quality of materials used.
Planning and Diagrams:
Clarify if detailed diagrams and plans for the electrical installation need to be created.
Permits and Standards:
Check if building permits are required for the planned electrical work and clarify if the electrician is familiar with local building codes and electrical standards.
Communication and Coordination:
Establish clear communication channels for questions and coordination.
Final Inspection and Quality Assurance:
Ensure that a thorough final inspection of the electrical installations is conducted and that the quality meets expectations.
Payment Terms:
Agree on clear payment terms, including deposits and the timing of the final payment.
Safety Measures:
Inquire about the safety measures taken during the work to prevent accidents.
Maintenance and Inspection:
Discuss the possibility of regular electrical maintenance and inspection after the completion of the work.

License and Certification:
Verify if the HVAC specialist holds the necessary licenses and certifications for HVAC work.
Experience and References:
Inquire about the HVAC specialist's experience in this field and request references from previous customer projects.
Insurance:
Ensure that the HVAC specialist has adequate liability insurance to cover any damages during the work.
Cost and Estimate:
Request a detailed cost estimate that includes material costs, labor costs, and any additional fees.
Scope of Work and Schedule:
Clarify the exact scope of the HVAC work and the timeline for completion.
Guarantee and Warranty:
Inquire about the warranty or guarantee terms offered by the HVAC specialist for their work.
Contract Conclusion:
Enter into a written contract with the HVAC specialist, clearly outlining all agreements, costs, and timelines.
Material Selection and Quality:
Discuss the selection of HVAC components and the quality of materials used.
Planning and Sizing:
Clarify if detailed planning and sizing of the HVAC systems are required.
Permits and Standards:
Check if building permits are required for the planned HVAC work and clarify if the HVAC specialist is familiar with local building codes and HVAC standards.
Communication and Coordination:
Establish clear communication channels for questions and coordination.
Final Inspection and Quality Assurance:
Ensure that a thorough final inspection of the HVAC systems is conducted and that the quality meets expectations.
Payment Terms:
Agree on clear payment terms, including deposits and the timing of the final payment.
Safety Measures:
Inquire about the safety measures taken during the work to prevent accidents.
Maintenance and Inspection:
Discuss the possibility of regular HVAC maintenance and inspection after the completion of the work.

License and Certification:
Check for specific trade or commercial licenses.
Inquire about relevant professional certificates or master titles.
Experience and References:
Explore the duration of professional experience and specializations.
Request photos or visits to completed projects.
Insurance:
Ask about the coverage amount of liability insurance.
Inquire about professional liability insurance.
Cost and Estimate:
Request a breakdown of costs for materials, labor, and additional services.
Clarify if changes in project scope incur additional costs.
Scope of Work and Schedule:
Discuss detailed questions about the project scope and individual work steps.
Inquire about flexibility in scheduling changes.
Guarantee and Warranty:
Ask about the length and conditions of the warranty period.
Clarify how complaints and revisions are handled.
Contract Conclusion:
Ensure that all oral agreements are documented in writing.
Review cancellation terms and possible fees.
Quality of Materials:
Inquire about the origin and quality of materials used.
Discuss options for environmentally friendly or sustainable materials.
Permits and Standards:
Clarify if the carpenter is familiar with all necessary building and safety standards.
Inquire about who is responsible for obtaining permits.
Communication and Coordination:
Agree on regular status updates and meeting schedules.
Clarify how unforeseen problems will be communicated.
Final Inspection and Quality Assurance:
Arrange for a final acceptance with the carpenter.
Ask which quality assurance standards are applied.
Payment Terms:
Clarify if deposits are required and how the remaining balance is to be paid.
Discuss payment deadlines and methods.
Aftercare:
Inquire if regular maintenance or inspections are offered.
Clarify how to access customer service and support when needed.